Luo tuotteellesi ammattimainen CMF-määrittelylomake
Järjestä tuotteesi värit, materiaalit, pinnat ja osatiedot yhteen selkeään CMF-määrittelylomakkeeseen. Lisää numeroidut huomautukset tuotekuvaan, dokumentoi materiaali- ja pintavaatimukset sekä vie PDF tai muokattava CSV suunnittelukatselmuksia ja toimittajaneuvotteluja varten.
Part-level physical materials, PBR finishes & multi-direction comparison
Explore colorways and surface finishes directly on product photos
Numbered part callouts, engineering spec tables, PDF & CSV export
Pudota tuotekuvasi tähän
JPG, PNG tai WebP. Selkeä valokuva, jossa osat näkyvät, toimii parhaiten.
Numbered Product Parts & Callouts
💡 Interactive Spec Sheet Guide: Click any part card above, then click the corresponding location on the photo to anchor its callout pin. Modify specifications in the table below.
CMF Specifications & References
Bill of Materials (BOM)Define detailed material grades, SPI polish / VDI texture standards, manufacturing processes, and supplier references.
Each direction is one color and finish option for the same part list. Click a name to rename it. Material, finish and process are shared by all directions.
| # | Part | Material / grade | Color | Finish | Process | Status | Supplier / ref. | |
|---|---|---|---|---|---|---|---|---|
| 1● | #1E293B | |||||||
| 2● | #64748B | |||||||
| 3● | #0F172A | |||||||
| 4● | #38BDF8 |
The PDF shows the selected colorway on the image and lists every colorway in the table.
Standardized Part Numbering
Every visible product surface must carry an unambiguous part index (01 Housing, 02 Trim, 03 Yoke). Numbered tags eliminate miscommunication between industrial design, mechanical engineering, and toolmakers.
Material Grades & Standards
Specify precise chemical designations (e.g. AL6063-T6, SUS304, PC/ABS Bayer Bayblend) rather than generic labels. Include international color standards (Pantone FHI, RAL Classic) for color matching.
Surface Finishes & Textures
Reference standardized mold texture standards (SPI A1/A2/B1, VDI 3400 scale from #12 to #45) and surface treatments (anodizing micron thickness, PVD coating, micro-bead blast mesh sizes).
Exploring 3D or 2D CMF appearance first?
Before creating final engineering specifications, preview interactive PBR materials in the 3D CMF Studio or test color combinations in the 2D Image CMF Editor.